C6 Corvette Coupe Targa Top Corner Cap Repair Kit
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
This part is a new, reproduction C6 Targa Top Corner Cap Repair Kit which can be installed on any of the following Corvette Coupe models:
Year | Body & Trim |
2013 | Base, Grand Sport, Z06, ZR1 |
2012 | Base, Grand Sport, Z06, ZR1 |
2011 | Base, Grand Sport, Z06, ZR1 |
2010 | Base, Grand Sport, Z06, ZR1 |
2009 | Base, Z06, ZR1 |
2008 | Base, Z06 |
2007 | Base, Z06 |
2006 | Base, Z06 |
2005 | Base |
GM made a design error in the corner caps that allow the roof to be stowed in the trunk. After inserting and removing the roof in the rear storage compartment, several shatter and fall out. The flimsy inner tabs that hold these caps in place in the roof frame were not built to withstand the jarring motions that a 25 lb. roof causes during storage and transportation. When these tabs wear out and break, they fall out of the frame, making storage difficult.
These new and enhanced caps are glued in place with a flexible, long-lasting adhesive, providing the extra support required to keep the caps in good condition.
This C6 Coupe Targa Top Corner Cap Repair Kit includes:
- Tube of Glue
- Passenger Side/Right Hand Side Cap
- Driver Side/Left Hand Side Cap
Installation Instructions:
- Using a screwdriver simply pop out old caps if they are still in place.
- Apply glue to edge of the new cap and the pocket in frame where the cap will be placed.
- Press the cap into place.
- Let the glue cure overnight.
Reviews
There are no reviews yet.