Can’t find the part you are looking for? Let us help you find it!

The C2 Corvette is the second generation of the Corvette sports car produced by General Motors from 1963 to 1967. Corvette Salvage offers a variety of C2 Corvette parts. If you cannot find the parts you are looking for, simply fill out a Parts Request form and let one of our representatives help out!

Out of Stock
$225.00

This part is a new, reproduction C2 to C3 17-1/2" Fan Blade which can be installed on a 1966 to 1970 Corvette.

$30.00

This part is a new, aftermarket 4 Piece Weatherstrip Removal & Installation Kit which can be used to remove weatherstripping on any Corvette model.

Out of Stock
$5.50

This part is a new, reproduction C2 to C3 Rubber Locking Gas Cap Gasket which can be installed on a 1963 to 1974 Corvette.

$100.00

This part is a good, used C2 to C3 Front Upper Control Arm which can be installed on a 1963 to 1982 Corvette.

$22.95

This part is a new, reproduction C2 to C3 Front Emergency Brake Cable which can be installed on a 1967 to 1982 Corvette.

$14.95

This part is a new, reproduction C2 Accelerator Pedal which can be installed on a 1963 to 1967 Corvette.

$13.00

This part is a new, reproduction C2 to C3 Ash Tray which can be installed in a 1963 to 1976 Corvette.

Out of Stock
$50.00

This part is a good, used C2 to C3 Jack Wrench & Handle which can be installed on a 1967 to 1982 Corvette.

$250.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel Inner Corner Molding which can be installed on a 1963 Corvette with the split window option.

$250.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel Rear Outer Corner Molding which can be installed on a 1963 Corvette with the split window option.

$250.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel Front Outer Corner Molding which can be installed on a 1963 Corvette with the split window option.

$450.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel Side Molding which can be installed on a 1963 Corvette with the split window option.

$475.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel L-Shaped Center Molding which can be installed on a 1963 Corvette with the split window option.

$475.00

This part is a new, reproduction C2 Rear Split Window Stainless Steel Bottom Molding which can be installed on a 1963 Corvette with the split window option.

$150.00$235.00

This is a rebuilding service for a C2 to C3 Brake Caliper which can be installed on a 1965 to 1982 Corvette.

$175.00

This part is a new, reproduction C2 Vent Window Regulator which can be installed on a 1963 to 1967 Corvette.

$48.95

This part is a new, OEM Delco C2 to C3 Under Hood Horn Relay which can be installed on a 1966 to 1971 Corvette.

$39.95

This is a new, reproduction C2 to C3 16-Piece Rear Spring Mount Kit which can be installed on a 1967 to 1982 Corvette.

$24.95

This part is a new, reproduction C3 Door Handle Pull which can be installed on a 1965 and 1969 to 1977 Corvette.

$84.00

This part is a new, reproduction C2 to C3 327/350 A.I.R. Smog Pump Bracket which can be installed on a 1966 to 1979 Corvette with a small block engine.