Welcome to Dino's Corvette Salvage & Sales - The World's Largest Corvette Only Salvage Facility!

Add to Cart:

Factory Five GTM Supercar Kit Car Parts List

List Price: $5,995.00
Our Price: $4,899.99
You save: $1,095.01  (18%)

  • Part# C5-GTMK-9704
  • Shipping Weight: 700lbs
  • 8 Units in Stock


You are ordering the list of parts listed below to build a GTM supercar kit car from factoryfive.com. This package consists of the parts below. Please read the additional parts at the bottom of the page that are NOT included that need to be purchased separately.


GTM DONOR PARTS LIST (1997-2004 C-5 CORVETTE)

1

1 pair LH/RH Front lower control arms (rubber bushings installed and ball-joints pressed in)

1 pair LH/RH Front upper control arms (rubber bushings installed)

1 pair LH/RH Knuckles (upper ball-joints pressed in)

2 each Front bearing/hub assembly

1 pair LH/RH Hub backing plates for wheel speed sensor wiring attachment

2 each Locknuts for lower ball joints (M14 x 2mm)

2 each Locknuts for upper ball-joints (M12 x 1.75mm)

6 each Torx bolts (T55) for bearing/hub assembly to knuckles (M12 x 1.75mm x 55mm)

8 each Bolts for upper control arm to chassis (M10 x 1.5mm x 35mm)

8 each Washers for upper control arm to chassis (10mm)

4 each Cam bolts for lower control arms to chassis (M14 x 2mm x 110mm)

4 each Locknut for lower control arm bolts (M14 x 2mm)

4 each Cam washers for lower control arm bolts

4 each Bolts for lower shock mount (M8 x 1.25mm x 45mm)

4 each Locknuts for lower shock mount (M8 x 1.25mm)

1 pair LH/RH Front rotors

1 pair LH/RH Front calipers with sliders and hardware to attach sliders to calipers

4 each Bolts for front calipers to knuckles (M14 x 2mm x 47mm)

4 each Washers for calipers to knuckles (5/8” ID, 1 1/8” OD)

2 each Flexible brake lines with mounting brackets (front, slightly shorter than the rears)

2 each Banjo bolts with 4 crush washers for brake line attachment to calipers (M10 x 1.0mm)

2 pair Front brake pads


 FRONT SUSPENSION


10 each Lug-nuts for front suspension (M12 x 1.5mm)

1 pair LH/RH Rear lower control arms (rubber bushings installed and ball-joints pressed in)

1 pair LH/RH Rear upper control arms (rubber bushings installed)

1 pair LH/RH Knuckles (upper ball-joints pressed in)

2 each Rear bearing/hub assembly

2 each Locknuts for lower ball joints (M14 x 2mm)

2 each Locknuts for upper ball-joints (M12 x 1.75mm)

6 each Torx bolts (T55) for bearing/hub assembly to knuckles (M12 x 1.75mm x 55mm)

2 each Cam bolts for lower control arms to chassis, forward most mount (M14 x 2mm x 110mm)

2 each Locknut for lower control arm bolts, forward most mount (M14 x 2mm)

2 each Cam washers for lower control arm bolts, forward most mount

1 pair LH/RH Rear rotors

1 pair Rear calipers with sliders and hardware to attach sliders to calipers

4 each Bolts for rear calipers to knuckles (M14 x 2mm x 47mm)

4 each Washers for rear calipers to knuckles (5/8” ID, 1 1/8” OD)

2 each Flexible brake lines with mounting brackets (rear, slightly longer than the fronts)

2 each Banjo bolts with 4 crush washers for brake line attachment to calipers (M10 x 1.0mm)

2 pair Rear brake pads

10 each Lug-nuts for rear suspension (M12 x 1.5mm)

2 each Outer CV-joints

2 each Locknuts for outer CV-joints (M27 x 2mm)

2 each Rear toe link

2 each Locknuts for rear toe link to chassis (M16 x 2mm)

2 each Rear outer tie rods with jam nuts (M14 x 1.5mm)

 REAR SUSPENSION

2 each Locknuts for tie rod ball-joints (M12 x 1.75)

1 pair LH/RH E-brake backing plates (includes brake shoes and cylinders)

1 pair LH/RH e-brake cable to knuckle brackets

4 each Bolts for e-brake cable to knuckle brackets (M10 x 1.5mm x 70mm)

2 each E-brake cables

1 each E-brake handle (includes attached front cable with equalizer bar, black hand grip and boot)


 E-BRAKE


1 each E-brake cable connection bracket (connects front cable to both rear cables)

GTM DONOR PARTS LIST (1997-2004 C-5 CORVETTE)

2

1 each LH Fuel tank with pumps and sending units

1 each RH Fuel tank with pumps and sending units

1 each Fuel tank connector tube (only necessary if tanks came from 2003-2004 donor)

1 each Fuel filter

 FUEL

1 set Hard lines connecting filter to tank (3 total)

1 each Fan shroud

2 each Fans with attached motors and screws to attach to shroud

1 each Radiator

1 each LH/RH Radiator lower rubber isolators

1 each Coolant overflow tank

 COOLING

1 each Cap for coolant overflow tank

1 each OBD2 PCM computer

1 each Computer 2 piece mounting bracket

1 each TAC module (for fly by wire throttle)

1 each Throttle pedal (fly by wire)

1 each Fly by wire harness (connects throttle pedal to TAC module)

2 each Short 4 wire oxygen sensors

2 each Long 4 wire oxygen sensors

1 each Vehicle speed sensor (VSS) with mounting bracket

1 each Engine Harness

1 each Brown plug that connects to the under-hood fuse box with about 12 inches of all wires extending out

of it (for connection to the fuel pump, and ignition switch)

1 each White plug that connects to the under-hood fuse box with about 12 inches of all wires extending out

of it (for connection to cooling fans and air pump, fuel level sender, and vehicle speed sensor VSS)

1 each OBD2 Engine scan plug with about 12 inches of all wires extending out of it

1 each Wiring plugs for fans, fuel tanks, brake light switch, wiper motor to steering column

1 each Under-hood fuse box

1 each Brake light switch with plastic holder

 ELECTRICAL

1 each Ignition switch

1 each Ignition cylinder, lock cylinder(s) and 2 key set

1 pair LH/RH Exterior door handles with gaskets

1 pair LH/RH Exterior rear view mirrors w/mounting nuts

2 each License plate lights with bulbs, mounting screws (leave about 12 inches wire from each bulb socket)

1 each Horns with mounting bracket (high note and low note)

1 pair LH/RH hood latches

1 each Hood release handle and 2 attached cables

2 each Hood strikers

1 pair LH/RH hood hinges

1 each Wiper motor with rotating assembly and 3 mounting screws

1 pair LH/RH Power window mechanisms

1 pair LH/RH Seat belts w/upper bolt plastic covers

2 each Seat belt receptacles

1 each Steering column (w/stalks, 2 piece cover, steering wheel nut M14 x 1.5mm)(non-telescoping best)



The items below are needed to complete the kit but are purchased separately from the list above. We have engines available in stock under our Driveline section.


1 each Battery

2 each Front wheels

2 each Rear wheels

2 each Front tires

2 each Rear tires

1 set Transaxle (Porsche G50) with flexible mount, inner CV-joints, starter, clutch, pressure plate, throwout

bearing, shift fork, and shift fork shaft)


 MISCELLANEOUS


1 set Engine (LS1, LS6) Be sure to have 1997-2004 exhaust manifolds, alternator, motor mounts w/hardware,

throttle body, mass air sensor, A/C compressor (if running A/C), drive belt idler pulley, belt tensioner

w/pulley, emissions pump(if running emissions), etc .


NOTE: Additional freight charges will be applied to the order based on your location.



Factory Five, GTM, GTM Supercar, Factory Five Racing, Factory Five parts kit


This product was added to our catalog on Saturday 14 July, 2012.

Your IP Address is: 54.163.61.66
Template designed by corvettesalvage.com. Copyright © 2017 Zen Cart. Powered by Zen Cart